Best Nicotine salt liquids for diy mixers in Scotland (100 W)
Nicotine salt liquids advice for Scotland, covering flavour blending, what to look for and where the trade-offs actually sit.
We spent weeks putting nicotine salt liquids options through their paces so the recommendations here reflect real use. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Local availability in Scotland shapes the practical answer more than the marketing does. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Pricing in Scotland shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying.
Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 4.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 873 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
Specifications
Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.
| Reference model | RELX Pro |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 3000 mAh |
| Power range | 40 W |
| Liquid capacity | 4.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | ABS + glass |
| Charge port | USB-C |
| Connector | 510 thread |
| Airflow | adjustable sliding |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Cherry Lime Soda: sweet, tart, described as red cherry with a lime lift. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Scotland
Availability in Scotland is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
